CDCBM - F0001 MIL-P-52108 LATEX PROLINE WHITE
- MSDS: CDCBM
- Manufacturer: DEL PAINT CORP
- Product Name: F0001 MIL-P-52108 LATEX PROLINE WHITE
- National Stock Number: 8010-00F052753
Product Identification
Product ID:F0001 MIL-P-52108 LATEX PROLINE WHITE
MSDS Date:07/22/1995
FSC:8010
NIIN:00F052753
MSDS Number: CDCBM
Responsible Party
OKLAHOMA CITY, OK 73106-6699
US
Emergency Phone: 405-692-7269/405-672-1431
Info Phone: 405-672-1431/800-866-6823
Cage: EO523
Contractor
Telephone: 405-672-1431
Cage: 39934
Ingredients
NON-HAZARDOUS INGREDIENTS
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY CAUSE SOME NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: MAY CAUSE SOME NAUSEA.
First Aid
First Aid:INGESTION: GIVE 2 GLASSES OF WATER & INDUCE VOMITING BY
PUTTING FINGER DOWN THROAT. SKIN/EYES: FLUSH W/WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:241F
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT BURN UNTIL WATER HAS
EVAPORATED.
Accidental Release
Spill Release Procedures:MAJOR LEAKS: SHOULD BE COLLECTED FOR DISPOSAL.
MINOR LEAKS: MAY BE FLUSHED TO SEWER IF LOCAL REGULATIONS PERMIT.
Handling
Handling and Storage Precautions:STORE >32F.
Other Precautions:DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:USE APPROVED MECHANICAL FILTER RESPIRATOR TO
REMOVE SOLID AIRBORNE PARTICLES OF OVER-SPRAY DURING SPRAY
APPLICATION.
Ventilation:NORMAL SUCH AS FAN.
Protective Gloves:DESIRABLE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH FACILITIES.
Work Hygienic Practices:WASH HANDS & FACE BEFORE EATING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212-387F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:71.66
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:TEMPS >32F.
Hazardous Decomposition Products:CO & CO2.
Disposal
Waste Disposal Methods:BURY IN A LANDFILL WHERE PERMITTED, IAW/FEDERAL,
STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.